The LCD-4z is engineered with a new magnesium housing to produce a light-weight, visually appealing headphone, the LCD-4z maintains the sound signature of LCD-4. The LCD-4z features a dark sleek aesthetic with gold accents. The magnesium rings of the LCD-4z are designed to be strong, lightweight, and non-resonant for a very clean output. The LCD-4z features our most advanced diaphragm design. Benefits include faster response for better transient/impulse response, imaging, and the flattest, deepest, most accurate bass response of any headphone available.
Double Fluxor™ Magnet Arrays bring the magnetic flux to 1.5 Tesla, nearly doubling the power driving the diaphragm for improved transient response and far greater resolution. Combining our Fluxor™ magnet arrays, nano-scale diaphragm, Fazors, Uniforce voice coil, and other features, the LCD-4 and LCD-4z give you even lower distortion and greater accuracy - usually 1/10th the distortion of conventional headphones. The LCD-4z headphone is thoroughly engineered and meticulously hand-built using the finest materials combined with cutting-edge planar magnetic technology. We closely match transducers to within +/- 1 dB.
Features
- Planar magnetic drivers for better dynamics and frequency response
- Premium leather for style and durability
Audeze Technology
- Flux density 1.5 Tesla
- Large ultra-thin nano grade Uniforce diaphragms
- Double Fluxor™ magnetic arrays
- Fazor elements
The Audeze LCD Series Premium cable features cryogenically treated four conductor stranded wire, each wire consisting of a large number of extremely fine strands of single-crystal OCC copper with a combined cross section equivalent to AWG 20 that ensures low resistance and negligible signal loss. The white/black cable uses silver-plated copper strands. Crystals within strands are oriented in a specific pattern to provide the best possible signal transmission.
- Very flexible, tangle free
- Non-microphonic jacket
- Length: 2.5m; Weight: 110 g
Connectors:
- 1/4" (6.3mm) stereo OR 4-pin balanced XLR plug for connection to amplifier
- 2 x 4-pin mini XLR for headphone earcup connection
Electrical Specifications:
- Resistance: 12 milliohms per foot
- Capacitance: 10 picofarads per foot
- Inductance: 0.15 microhenrys per foot
- Dielectric strength: 1000V
PLEASE indicate choice of Balanced 4 pin XLR or 6.3mm Single Ended Connector in the check out notes. Thank you.
LCD-4z Specifications:
| Style |
Over-ear, open-back |
| Transducer type |
Planar magnetic |
| Magnetic structure |
Proprietary magnet array |
| Phase management |
FAZOR |
| Magnet type |
Neodymium N50 |
| Diaphragm type |
Nano-scale Uniforce™ |
| Transducer size |
106 mm |
| Maximum power handling |
15W |
| Maximum SPL |
>130dB |
| Frequency response |
5Hz – 20kHz |
| THD |
<0.1% @ 100dB |
| Impedance |
15 ohms |
| Sensitivity |
98 dB/1mW (at Drum Reference Point) |
| Voltage sensitivity |
107 dB/1V (at Drum Reference Point) |
| Minimum power requirement |
>100mW |
| Recommended power level |
1 - 4W |
