Stellia integrates a new generation of exclusive electrodynamic speaker drivers, capable of working at low acoustic load while offering an extremely extensive frequency response (5Hz – 40kHz).The new 110-micron NBR surround offers low compliance and a geometry that's developed entirely in relation to its inner volume.
Simultaneously, the frameless 100% copper voice coil (exclusive to Focal) offers an extremely reduced mass which, combined with its magnetic coupling to the motor, is able to reproduce the tiniest nuances with great precision, whether bass articulation or the highest frequency details.
The crowning glory of these exceptional speaker drivers is the ‘M’-shaped pure Beryllium dome. Its very low mass (7 times lighter than titanium of identical rigidity) enables an extraordinary acceleration factor to be obtained, ensuring unfailing adherence to the original audio signal. Its rigidity ensures both impressive elongation and a high sound level, while preventing distortion of the dome.
Loading a speaker driver into an small inner volume makes it highly sensitive to its environment. The Stellia’s full-range speaker driver therefore includes a vent to control the balance between the bass and the midrange. A second vent, located at the back of the ear cup, picks up the rear wave coming from the centre of the motor to avoid any compression and extend the frequency response of the speaker driver. How? By ensuring the connection between the centre of the motor and the outer part of the ear cup located beneath the logo. The speaker driver’s response in the bass-reflex acoustic loudspeaker is thus extended to the lowest frequencies while providing remarkable linearity and bass articulation, all without any dynamic compression.
• Reference closed-back headphones for home and on-the-go use
• Exclusive full-range speaker drivers with an ‘M’ shape pure Beryllium dome (patent pending)
• Uncompromising tonal balance, reproduction of the tiniest sound details at both very high and very low frequencies
• Incredible dynamics within a pair of closed-back headphones
• Excellent performance when connected to a DAP.
• Very good ambient noise soundproofing
• Comfortable and ergonomic
• High-quality materials used
SPECIFICATIONS:
|
Type
|
Circum-aural closed-back headphones
|
|
Impedance
|
35 Ohms
|
|
Sensitivity
|
106dB SPL / 1mW @ 1kHz
|
|
THD
|
0.1% @ 1kHz / 100 dB SPL
|
|
Frequency response
|
5Hz–40kHz
|
|
Loudspeaker
|
1.6" (40mm) pure Beryllium "M" shape dome
|
|
Weight
|
0.96lb (435g)
|
|
Cables provided
|
• 1 x 4ft OFC 24 AWG cable with 1/8" (3.5mm) TRS Jack connector
• 1 x 10ft OFC 24 AWG cable with 4-pin XLR connector
• 1 x Jack adapter, 1/8" (3.5mm) female – 1/4" (6.35mm) male
|
|
Carrying case provided
|
9.8"x9.4"x4.7" (250x240x120mm)
|
