24 pole precision, high torque motor mounted on an anti-vibration assembly.
240V 50Hz / 110V 60Hz, depending on country
3.3VA
33 & 45 rpm
Precision moulded round section rubber belt
220mm
170mm (h) x 470mm (w) x 360mm (d) , including feet and lid.
TT Two Deluxe
Audio Note™ turntables are all designed and built according to a core set of four fundamental insights into what delivers musicality. We have settled on these design principles after many years of experimentation and experience. They can be found on every Audio Note™ turntable from the TT-One right through to the TT Three Reference in which they achieve their ultimate expression.
A suspended chassis attenuates vibration energy from the speakers and the room to deliver purity of reproduction.
A low mass platter absorbs much less energy from the cartridge in the groove of the record without deadening the sound.
A vibration free high torque AC drive system delivers constant platter speed even when the grooves contain strong modulations.
The transmission of vibration in our turntables and arms is managed through the use of materials with different resonances and mass, so that energy is led away from the cartridge, where it does harm to the sound.
Expect even more...The TT-Two is built to give an even more generous measure of musical enjoyment, particularly when paired with an Audio Note™ arm to create a combination able to punch well above its price point.
It has a high quality aluminium sub-chassis with optimised three-point suspension geometry. Two opposed AC motors deliver twice the torque to the low-mass acrylic platter and also have the benefit of further stabilising the suspension. The robust and long-life bearing features a sintered and polished shaft in a brass tube with a hardened thrust plate and a precision ground steel ball.
Standard real wood veneers are as follows: - Black Ash / Rosewood / Cherry. We can also offer satin and high gloss paint finishes, and many of the real wood veneers we use for our loudspeaker cabinets, at extra cost.
Technical Specifications:
24 pole precision, high torque motor mounted on an anti-vibration assembly.
240V 50Hz / 110V 60Hz, depending on country
3.3VA
33 & 45 rpm
Precision moulded round section rubber belt
220mm
170mm (h) x 470mm (w) x 360mm (d) , including feet and lid.
TT Three
High mass torque without any of the usual 'high mass platter' energy storage problems.
Very light, highly inert platter made from Lexan, which has virtually no reflective properties nor any resonance storage problems.
Rubber belt driving the platter around its outside rim.
3 immensely powerful motors, whose speed is “locked” together by the master control unit’s digitally synthesised frequency.
This combination provides a platform with levels of stability and torque which high mass turntables can only dream of! When the high mass stored in the motors provides torque to drive the light, inert platter, the energy is focused as rotation, nothing else, and the best of both worlds is achieved.
Suspension System
Three point suspended design, centred at the bearing, which is also the epicentre of the motors’ inertia. This completely removes the most common problem in suspended turntables, where the motors and suspension are misaligned in relation to each other and as a result, the platter is vacillating constantly between the centre of the drive system and the centre of the suspension.
The sub chassis is designed with 3 arms. One has the tonearm in the standard position on the far right, the other two hold mass balancing weights, which provide an exact equivalent of the combined arm / cartridge mass, thus loading each suspension tower equally.
Tonearm Choice
The TT-Three is supplied with the arm board cut for our own '/II' 9" tonearms. This is the only way we supply the TT-Three, and we do not offer any other arm boards to fit the inferior offerings from other manufacturers. Our tonearms are the perfect choice for the TT-Three, so why use anything else?!
Finishes:
Turntable; Satin Black or Satin White as standard
High Gloss Black or High Gloss White at extra cost
PSU fascia - Anodised Aluminium or Black Acrylic
